Contact Us

Solvent extraction of titanium from the simulated

2012-2-1  The feasibility to extract Ti from the simulated ilmenite sulfuric acid leachate was investigated. Titanium in the simulated ilmenite sulfuric acid leach liquors can be effectively extracted. An almost complete titanium and iron separation from the simulated leachate was realized with separation factor of 2367. Extracted titanium species possibly included TiOSO 4 ·TRPO besides TiO(HSO 4) 2 ·2TRPO.

Extraction of titanium and iron from ilmenite with

2021-7-15  Description: "As part of a U.S. Bureau of Mines program to develop a more continuous titanium metal extraction process that uses domestic resources, a study was made to determine the extraction of titanium (Ti) and iron (Fe) from New York rock ilmenite using fluosilicic acid (H2SiF6 ). The effects of leach temperature, acid concentration, and

Titanyl sulfate extracted from the mineral ilmenite

2012-10-1  Abstract. Titanyl sulfate (TiOSO 4) extracted with sulfuric acid from the mineral ilmenite (FeTiO 3 ), which has a high content of titanium (32.2 wt.%) was study as acid solid catalyst for the oleic acid esterification. The maximum extraction of Ti was 98 wt.%. As reference catalysts sulfated titania ( SO 4 2 TiO 2) and titania (TiO 2) were

Preparation of titanium dioxide nanostructure from

2018-7-9  In this study, TiO2 nanoparticles have been obtained from low-grade ilmenite ore via two consecutive acid digestion and solvent extraction processes. The a Preparation of titanium dioxide nanostructure from ilmenite through sulfate-leaching process and solvent extraction by D 2 EHPA

Development of Extraction Method and Characterization

2016-5-17  Titanium can be extracted by hydrometallurgy method which includes ilmenite leaching with hydrochloric acid and sulfuric acid 13-15 . This process is one of

Extraction of titanium (IV) from acidic media by 2

The extraction of titanium(IV) from sulphate, chloride and nitrate solutions has been investigated using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (EHEHPA) in kerosene. The kinetics of extraction was slow, requiring 60 min for the complete extraction of titanium and was improved with the increase of the extractant concentration in the organic phase.

From trace to pure: Recovery of scandium from the

2019-1-1  In the sulphate production process for titanium pigment, titanium is leached from the ilmenite and/or titanium slag using sulphuric acid (Zhang et al., 2011). The hydrolysis “mother” liquor discharged from the production of titanium pigment is usually called titanium white waste acid (abbreviated as waste acid) in China ( Xu and Yang, 2001 ; Feng et al., 2016 ).

Titanium and iron dissolutions from ilmenite by acid

Ilmenite concentrate was soluble in 1.5 M sulfuric acid and 1.5 M hydrochloric acid solutions at 90 °C. However, improved leaching was obtained with 8 and 12 M sulfuric acid solutions. The chemical leaching results for different stirring speeds showed that a speed of 750 rpm was favourable to iron and titanium

extraction of titanium chemguide

2015-7-17  Titanium extraction. The overall process. Titanium is extracted from its ore, rutile TiO 2. It is first converted into titanium(IV) chloride, which is then reduced to titanium using either magnesium or sodium. Conversion of TiO 2 into TiCl 4. The ore rutile (impure titanium(IV) oxide) is heated with chlorine and coke at a temperature of about 1000°C.

Extraction and separation of titanium(IV) with

2005-7-26  and PC-88A25,26 from chloride, nitrate, sulphate and phosphate media, they have been con-fined to studying the extraction equilibria and the extraction kinetics. Extraction of Ti(IV) in chloride media by mixtures of mono-2-ethylhexyl phosphoric acid (MEHPA) and D2EHPA have also been reported. 27

Solvent Extraction of Titanium from the Simulated Ilmenite

2012-3-12  Xiaoli Hao, Li Lü, Bin Liang, Chun Li *,Pan Wu, Ju WangSolvent Extraction of Titanium from the Simulated Ilmenite Sulfuric Acid Leachate by Trialkylphosphine OxideHydrometallurgy,2012 ,113–114, 185-19

Extraction of titanium and iron from ilmenite with

2021-5-24  Extraction of titanium and iron from ilmenite with fluosilicic acid. Content and Copyright; Public Access Policy; Contact Us

Preparation of Titanium Dioxide Anatase Pigment from

2015-2-12  setta ilmenite concentrate using the sulphate process. . In this process, the ore containing titanium is dis-solved in sulfuric acid, yielding a solution of tita-nium, iron and other metal sulfates. Then, through a series of steps including chemical reduction, pu-rification, precipitation, washing and calcination, pigmentary-size intermediate TiO 2

Quick Answer: How Do You Make Titanium From

2021-6-25  The ore rutile (impure titanium(IV) oxide) is heated with chlorine and coke at a temperature of about 1000°C. How is titanium dioxide manufactured? TiO2 is produced from either ilmenite, rutile or titanium slag. Titanium pigment is extracted by using either sulphuric acid (sulphate process) or

TiO2 mineral from Ilmenite: Development of

TiO2 mineral from Ilmenite: Development of extraction method and its characterization 4 th International Conference and Exhibition on Materials Science & Engineering September 14-16, 2015 Orlando, USA. Muhammad Nurdin, Maulidiyah, Abdul Haris Watoni, Nuryadin Abdillah and Dwiprayogo Wibowo

Titanium and iron dissolutions from ilmenite by acid

Ilmenite concentrate was soluble in 1.5 M sulfuric acid and 1.5 M hydrochloric acid solutions at 90 °C. However, improved leaching was obtained with 8 and 12 M sulfuric acid solutions. The chemical leaching results for different stirring speeds showed that a speed of 750 rpm was favourable to iron and titanium

Extraction and separation of titanium(IV) with

2005-7-26  Extraction and separation of titanium(IV) with D2EHPAand PC-88Afrom aqueous perchloric acid solutions RAJEEV K. SINGH and PURSHOTTAM M. DHADKE * InorganicChemistryLaboratory,AppliedChemistryDivision,DepartmentofChemicalTechnology, UniversityofMumbai,Matunga,Mumbai–400019,India (Received 20 August 2001, revised 1 March 2002)

Titanium and iron dissolutions from ilmenite by acid

Titanium and iron dissolutions from ilmenite by acid leaching and microbiological oxidation techniques. Woranart Jonglertjunya. Corresponding Author. Department of Chemical Engineering, Faculty of Engineering, Mahidol University, Phuttamonthon, Nakhon Pathom, 73170 Thailand

A literature review of titanium metallurgical processes

2020-8-13  magnetic ilmenite, the rutile concentrate containing about 95% TiO 2 is used as TiO 2 raw material directly (Kahn, 1984). • Synthetic rutile. There are a few processes to remove the iron from ilmenite to produce synthetic rutile which typically contains about 92% TiO 2. • High titanium slag. Ilmenite is smelted in an electric arc furnace to

extraction of titanium chemguide

2015-7-17  Titanium extraction. The overall process. Titanium is extracted from its ore, rutile TiO 2. It is first converted into titanium(IV) chloride, which is then reduced to titanium using either magnesium or sodium. Conversion of TiO 2 into TiCl 4. The ore rutile (impure titanium(IV) oxide) is heated with chlorine and coke at a temperature of about

Tannic Acid Selectively Extracting Titanium from Ilmenite

A novel route of extracting titanium using tannic acid from ilmenite was investigated. The strong affinity of tannic acid towards metal ions having high oxidation states was explored to extract titanium selectively from a multi-element solution prepared by dissolving ilmenite in sulphuric acid and ammonium sulphate. Titanium-tannic acid complex

Solvent Extraction of Titanium from the Simulated Ilmenite

2012-3-12  Xiaoli Hao, Li Lü, Bin Liang, Chun Li *,Pan Wu, Ju WangSolvent Extraction of Titanium from the Simulated Ilmenite Sulfuric Acid Leachate by Trialkylphosphine OxideHydrometallurgy,2012 ,113–114, 185-19

Preparation of Titanium Dioxide Anatase Pigment from

2015-2-12  setta ilmenite concentrate using the sulphate process. . In this process, the ore containing titanium is dis-solved in sulfuric acid, yielding a solution of tita-nium, iron and other metal sulfates. Then, through a series of steps including chemical reduction, pu-rification, precipitation, washing and calcination, pigmentary-size intermediate TiO 2

ALUMINOTHERMIC PRODUCTION OF TITANIUM ALLOYS

2019-11-19  Influence of the initial acid concentration The extraction of ilmenite using the sulphate process requires approximately 2 tonnes of concentrated sulphuric acid per tonne of ilmenite. The generated extraction cake is then leached with water. The content of free acid must guarantee a

Synthesis of titanium oxysulfate from ilmenite

Ilmenite (FeTiO 3 ) is a mineral that abundantly available in nature. Its extraction process can provide titanium dioxide (TiO 2 ) which is useful for various strategic applications including dye-sensitized solar cells, photocatalysts, and water splitting. To obtain TiO 2,ilmenite has to be converted first into titanium oxysulfate (TiOSO<SUB>4</SUB>) precursor.

Quick Answer: How Do You Make Titanium From

2021-6-25  The ore rutile (impure titanium(IV) oxide) is heated with chlorine and coke at a temperature of about 1000°C. How is titanium dioxide manufactured? TiO2 is produced from either ilmenite, rutile or titanium slag. Titanium pigment is extracted by using either sulphuric acid (sulphate process) or

PAPER OPEN ACCESS Titanium dissolution from

During the titanium dissolution process from the decomposed Ilmenite into the sulphuric acid solutions, the sodium titanate containing in the decomposed Ilmenite reacts with sulphuric acid to produce titanium sulphate and sodium sulphate according to reactions 2 [13]: Na. 2. TiO. 3 + 3 H. 2. SO. 4 → Ti(SO. 4) 2 + Na. 2. SO. 4 + 3 H. 2. O (2)

A literature review of titanium metallurgical processes

2020-8-13  magnetic ilmenite, the rutile concentrate containing about 95% TiO 2 is used as TiO 2 raw material directly (Kahn, 1984). • Synthetic rutile. There are a few processes to remove the iron from ilmenite to produce synthetic rutile which typically contains about 92% TiO 2. • High titanium slag. Ilmenite is smelted in an electric arc furnace to

Titanium and iron dissolutions from ilmenite by acid

Titanium and iron dissolutions from ilmenite by acid leaching and microbiological oxidation techniques. Woranart Jonglertjunya. Corresponding Author. Department of Chemical Engineering, Faculty of Engineering, Mahidol University, Phuttamonthon, Nakhon Pathom, 73170 Thailand

Sulfuric Acid Leaching of Altered Ilmenite Using

The kinetics of the sulfuric acid leaching of altered ilmenite, mechanisms, and process intensification methods were studied. The effect of changing the chemical composition during grinding was determined. The content of ilmenite and pseudorutile decreased from 5.3% to 3.1% and from 90.2% to 63.1%, respectively. Rutile increased from 4.5% to 28.7%, while a pseudobrookite new phase appeared in